Project2612

Packs that need work. [May 4th, 2018]

Got a new set? Wanna point something out with an old set? Wanna update an existing set? Here's your place to do it!

Packs that need help! [08/07/2016]

Postby Raijin » Fri Apr 28, 2017 10:11 pm

Hello. I have an update regarding After Burner II. It turns out the VGM's are fine (except track 5 - After Burner). There is a new VGM Player called RYMCast which plays with cycle accuracy, and emulates the real YM2612's ladder effect.

The downpitched note at the start of Red Out plays perfectly in this new player because it turns out it relied on the ladder effect itself. The reason it doesn't play in any other emulator is simply because there is no option to enable the ladder effect. The track After Burner, however, simply needs to be relogged with an emulator which has the PSG play properly pitched samples. It seems to me like the most recent version of Fusion actually seems correct now regarding that.
Raijin
New Around Here
 
Posts: 9
Joined: Sat Jan 28, 2017 12:55 am

Packs that need help! [08/07/2016]

Postby ValleyBell » Sun Apr 30, 2017 9:28 am

Older versions of Kega Fusion probably had bad Z80 cycle times, so I think the whole pack would need a rerip.
Skitchin' suffers from off-tune guitar DAC samples as well.
ValleyBell
Board Regular
 
Posts: 116
Joined: Mon Aug 30, 2010 7:10 am

Packs that need help! [08/07/2016]

Postby Koto » Sun Apr 30, 2017 1:40 pm

I found some issues playing sets with RYMcast, so... Probably the problem is with the sets itself, instead of the player? In that case, most of the sets from this page should be redone :undecided:

See ya
Koto
Been Here for a Bit
 
Posts: 46
Joined: Tue Apr 08, 2008 1:01 pm

Packs that need help! [08/07/2016]

Postby donluca » Sun Apr 30, 2017 2:04 pm

Koto wrote:I found some issues playing sets with RYMcast, so... Probably the problem is with the sets itself, instead of the player? In that case, most of the sets from this page should be redone :undecided:

See ya


You can contact Mathieu and see if it's an issue with RYMCast.

You can also compare with our releases (if available).
"Ask not what others can do for you, but what you can do for others"

Founder of the 16-bit audiophile project
http://16bap.theclassicgamer.net
User avatar
donluca
Been Here for a Bit
 
Posts: 40
Joined: Tue Dec 11, 2012 2:08 pm
Location: Rome

Packs that need help! [08/07/2016]

Postby Raijin » Sun Apr 30, 2017 2:38 pm

There are problems with RYMCast. It is still a bit buggy and doesn't play all VGM's properly. Just something to keep in mind.
Raijin
New Around Here
 
Posts: 9
Joined: Sat Jan 28, 2017 12:55 am

Packs that need help! [08/07/2016]

Postby TEOL » Mon May 01, 2017 12:22 pm

ValleyBell wrote:Puggsy SCD features tracks in Redbook Audio and their speed matches the current VGM rip, so I'd probably go with that.

Maybe sometime I'll look into the sound driver to see how it does its timing. Bill's Tomato Game delayed the music on every 5th frame in NTSC mode and I think it's the same sound driver.


That would mean the music plays in 50hz even with a 60hz picture and movement right.

In other words no musical difference between regions on that Psygnosis England sound driver codec format as long as you play it straight and not switch it to NTSC when playing in PAL or PAL when playing in NTSC on your system unless you find the gameplay too slow and ploddy or too fast and furious.

Gotcha

I've had some on chip PAL only games which I turned on NTSC after the bootup and it sped up the music but let me play full screen and speed. So as long as you didn't do that in your KEGA it's the original speed I guess even with 60hz gameplay on those dual format PAL made games.

I guess that means 6th frame = Tunes made for NTSC which means if you play in PAL full stop it will be slower unless you are a lucky sod with a PAL Asain PAL 60 in that caase they would have the same speed music although it's PAL.
TEOL
Been Here for a Bit
 
Posts: 30
Joined: Thu Jul 14, 2011 1:00 pm

Packs that need work. [May 9th, 2017]

Postby Raijin » Tue May 16, 2017 7:27 pm

I downloaded the Time Trax pack from the updated Google Drive page, and there are a couple of erroneous VGM's. All of them are VGM version 1.51 with 0.50 volume, but Track 3 - Stage 1, 3, 8 has version 1.50 at full volume, which is a small oversight I would guess. Track 5 - Stage 4, 6 is broken, and doesn't play at all.
Raijin
New Around Here
 
Posts: 9
Joined: Sat Jan 28, 2017 12:55 am

Packs that need work. [May 9th, 2017]

Postby Monkeymook » Tue May 16, 2017 8:59 pm

Raijin wrote:I downloaded the Time Trax pack from the updated Google Drive page, and there are a couple of erroneous VGM's. All of them are VGM version 1.51 with 0.50 volume, but Track 3 - Stage 1, 3, 8 has version 1.50 at full volume, which is a small oversight I would guess. Track 5 - Stage 4, 6 is broken, and doesn't play at all.


Strange. I just played them all from the site pack in the Google Drive set, and they all played perfectly. (Using in_vgm 0.35 on XMPlay)

What are you using to play them with?
User avatar
Monkeymook
 
Posts: 105
Joined: Sun Aug 22, 2010 2:33 am
Location: Norfolk, VA

Packs that need work. [May 9th, 2017]

Postby Raijin » Tue May 16, 2017 10:28 pm

Monkeymook wrote:Strange. I just played them all from the site pack in the Google Drive set, and they all played perfectly. (Using in_vgm 0.35 on XMPlay)

What are you using to play them with?

The latest version of VGMPlay and latest foo_gep.
Raijin
New Around Here
 
Posts: 9
Joined: Sat Jan 28, 2017 12:55 am

Packs that need work. [May 9th, 2017]

Postby Monkeymook » Tue May 16, 2017 10:58 pm

Raijin wrote:
Monkeymook wrote:What are you using to play them with?

The latest version of VGMPlay and latest foo_gep.


I think this might be something for VB to take a look at.

In the meantime, I'll see if I have any other packs lying around, or on the FTP.
User avatar
Monkeymook
 
Posts: 105
Joined: Sun Aug 22, 2010 2:33 am
Location: Norfolk, VA

PreviousNext

Return to Set Central

Who is online

Users browsing this forum: No registered users and 1 guest

Fatal: Not able to open ./cache/data_global.php